18
19
Configuring Settings
To access configuration settings, select
Settings
from
the main menu
,
and press
.
Default Vals
Restores default settings.
Simple Display
Limits the information on the display during
scanning or monitoring.
Default PL
The default playlist for scanning and for saving
objects found during searches.
Priority Mode
Priority Time
Enables Priority Mode, and sets the time
between priority scans. See "Priority
Scanning" on page 10.
Enable Record
Enables the record feature. See "Recording
and Playback" on page 21.
Search Record
Records received search transmissions.
G Atten Mode
G Atten On
Enables Global Attenuation and activates GA.
See "Priority Scanning" on page 10.
Search Dg AGC
Applies Digital AGC to digital transmissions.
G AGC Mode
G AGC On
Enables and activates Global AGC.
PlaySets Opt
Turns on the PlaySet Feature. See "Play Sets"
on page 17.
Sounds
Alerts
Sets iScan beeps and alert sounds.
Sets alerts: Off, Audio, Visual, Both
Key Beeps
Beep Volume
Enables or disables key tones and sets key
tone volume.
Alert Volume
Object and low battery alert volume.
Contrast
Sets the LCD contrast.
LModeBAT
LModeEXT
Sets the backlight mode with batteries and
external power: Off, On, Stealth, Normal, Key,
Ignore.
LiteArea
LiteTime
LiteLevel
Sets LCD and keypad lighting.
Backlight duration and brightness.
Welcome Text
1-5
Message when iScan is first turned on.
Blink Time 1-2
Controls the display time for each item.
Show Radio ID
Displays Radio ID (trunked systems).
Tag only
Displays only display name (trunked systems).
Use RID Alert
Displays an alert for transmissions with Radio ID.
Show VC/CC
Displays voice and control channel. Show
Radio ID will override.
Simple Display
must be
unchecked.
Show TGID
Displays talkgroup ID.
Simple Display
must be
unchecked.
Show Site
Name
Displays trunking site name, if two or more
trunking system sites are programmed.
Simple Display
must be unchecked.
CONV TGID
CONV Radio ID
Displays the talkgroup ID for P25 conventional
talkgroup calls. Displays the Radio ID for P25
conventional calls.
Simple Display
must be unchecked.
PC/IF CCDump
To file
Limit
Trim Logs
Streams ASCII Control Channel Dump data
over the USB interface for trunking control
channels, stores ASCII Control Channel Dump
data to the microSD card, and sets a limit for
the number of Trim Logs that are sent: 100,
200, 500, 1000.
Low Batt Time
Interval (seconds) between low-battery alerts.
Charge Time
Sets the radio charge time.
TG Disp
Display format for talkgroup IDs.
M36 Stat Bits
Uses status bits to track Motorola 3600 baud
trunking talkgroup calls.
M36 ENC
ignores encrypted bits on Motorola 3600 bps
control channel systems
EDAC Dig
ignores encrypted bits on EDACS control
channel systems
BandPlan
Selects USA or Canada.
FlexStep
Allows smaller steps between frequencies.
EncMode
For encrypted transmissions: Noise, Silent,
or Tone.
EncLevel
Sets the encrypted call tone level.
IF Out
Routes the IF Discriminator signal to the
headphone jack.
DSPLevelAdapt
Controls how fast the DSP adjusts to varying
P25 levels (default: 64). Higher = faster.
ADC Gain
Sets input signal to CODEC (default: +0dB).
DAC Gain
Sets output signal from CODEC, varying the
decoded signal audio level (default: +0dB).
Auto Power On
At 00:00
Mode:
Turns on your iScan at a specified time, to
a set function: Menu, Scan, Weather, or
Monitor.
Place Select
Disables the
Set Place
option on the main
menu.
Sig Bar 1-5
Sets the range for the Signal Strength
indicator.
DRAFT
DRAFT
