20
21
Recording and Playback
Your iScan contains a 2GB MicroSD card that can store over
50 hours of recording time. After you activate the recording
feature, you can record all transmissions for specific objects
and transmissions found during a search.
To enable the recording feature:
1.
Press
MENU
to access the main menu.
2.
Select
Settings
and press
.
3.
Select
Enable Record
and press
.
4.
To record during frequency searches, select
Search
Record
and press
.
5.
Select
Save Changes
and press
.
6.
Edit the object and activate the
Record
setting. See
"Editing Objects Manually" on page 20.
To play back recordings:
1.
Press
MENU
to access the main menu.
2.
Select
Playback
and press
.
3.
Press
/II
to play the file.
4.
You can press
MENU
for a list of playback options:
• Main Menu
– Returns to the main menu.
• Back
– Returns to the list of recorded files.
• Play From Here
– Plays the current recording and
all recordings afterwards.
• Delete All
– Deletes all recorded audio files.
• Delete Earlier
– Deletes recorded audio files prior
to the selected audio file.
• Delete Later
– Deletes the selected audio file and
all recorded audio files after the selected file.
5.
Press
SKIP
to stop playback.
Editing Objects Manually
1.
From the main menu, select
Browse Objects
.
2.
Use the four-direction pad to select an object.
NOTE:
Your iScan organizes imported objects beginning at
Playlist 151, named by service. Playlist 1 may be empty.
3.
Press
MENU
to enter the Object Edit menu:
Frequency
The frequency for the object.
Alpha Tag
The display name for the object.
Set Playlists
Assign the object to playlists.
Rx Mode
Receiving mode
Sq Mode
Squelch mode
Sq Search
Activates a search for the Squelch code
Sq Code
Squelch code
Sq Exclude
Excludes squelch
Locked Out
Locked objects are not scanned.
Skipped
Skipped objects are not scanned.
Priority
Priority object are checked more frequently.
Delay
Set a scan delay after a transmission ends.
Attenuate
Applies attenuation to the object
AGC
Reduces interference from strong local
transmitters (conventional frequencies only).
Alarm
Select a sound used for alarms.
Light
On, Off, or Flash.
Flash Pattern
Alert LED flash pattern.*
On Time / Off
Time
Flash pattern step duration. (Percentage: 100
= 1 second, 50 = 1/2 second).
LED Enabled
Enables the Alert LED.
LED Flash
Enables Alert LED flash patterns.
Color Count
The number of Alert colors. 0 = off.
Color 1-4
Hexidecimal value for each color.
Record
Record received transmissions.
( = Record this object)
Delete Object
Deletes the programmed object; the
frequency remains in the iScan library for later
programming, if desired.
5.
Use the four-direction pad and
SEL
button to change
settings. ( = selected)
6.
Select
Save Changes
and press
SEL
.
Previous
Next
Forward
Rewind
DRAFT
DRAFT
