Radio Shack Pro-60, Руководство пользователя, Страница: 9 / 43

MON Accesses the 10 monitor memories.
Number Each key has a single-digit label and a range of
Keys numbers.
Use the digits on the keys to enter the number for a
channel or a frequency.
Use the range of numbers above the key (for example
81-100) to select the channels in a channel-storage
bank (see "Understanding Channel Storage Banks").
ENTER Stores a frequency in a channel.
DIRECT/. Turns on the direct search mode or enters a decimal
point (necessary when programming frequencies).
AM/FM/ Switches the scanner between the AM, FM, or WFM
WFM modes.
PGM Sets the scanner so you can store frequencies into
channels.
CLEAR Clears an incorrect entry and is used when resetting
the scanner.
A LOOK AT THE DISPLAY
A look at the scanner's display will help you understand what each
indicator means.
Symbol Appears When
P The scanner is tuned to a priority channel.
MON The scanner is tuned to a monitor memory.
BANK The scanner's memory banks are turned on during
the scan mode.
CH The scanner is tuned to one of the 200 available
channels.
FM, AM, The scanner is set to the selected mode.
or WFM
NOTE: The symbol blinks when you manually select the mode.
Up or Down Shows the search direction in the search mode and
the scanning direction in the scan, program, and
manual modes.
-L- The scanner is searching using a limit search.
-d- The scanner is searching using a direct frequency
search.
SRCH The scanner is searching up or down the frequency
bands.
SCAN The scanner is scanning up or down the channels.
MAN You manually selected a channel.