Radio Shack Pro-60, Руководство пользователя, Страница: 15 / 43

You cannot turn off all banks. At least one bank must always
be active.
MANUALLY SELECTING A CHANNEL/FREQUENCY
Selecting a Channel
You can continuously monitor a specific channel without scanning. This is
useful if you want to hear a broadcast on a channel and do not want to miss
any details (even though there might be periods of silence) or if you want
to monitor a locked-out channel (see "Locking Out a Channel").
If the scanner is stopped at a channel you want to continue listening to,
quickly press MANUAL once before it continues scanning again.
NOTES: Pressing MANUAL additional times makes the scanner step through
the channels.
To change the channel step direction, press UP or DOWN before you
press MANUAL additional times.
If the scanner is scanning:
1. Press MANUAL to stop the scanning.
2. Enter the desired channel number
3. Press MANUAL again.
If the scanner is not scanning, enter the desired channel number then
press MANUAL.
Selecting a Frequency
You can manually select a desired frequency. This is useful if you want
to monitor a frequency you have not stored, or a frequency stored in a
locked-out channel (see "Locking Out a Channel").
1. If the scanner is scanning, press MANUAL to stop the scanning.
2. Enter the desired frequency.
3. Press DIRECT. The scanner continuously monitors the selected
frequency.
USING PRIORITY
The priority feature lets you scan through the programmed channels, and
still not miss an important or interesting call on a designated channel.
To use the priority feature, you need to designate a stored channel first
and then turn the priority feature on.
Designating a Channel
1. Press PGM.
2. Enter the desired channel number.
NOTES: You can designate any stored channel as the priority channel, but
you can have only one priority channel at a time.
To "undesignate" a priority channel, either designate another