SETTING THE AM/FM TUNING INCREMENT
The AM/FM frequency increment switch sets the correct frequency increments
for different countries. The switch is located in the battery
compartment.
Set the switch using the following guidelines:
If you are in the United States, Canada, or another north or south
American country, the switch is already set to B for you. In this
setting, the AM frequency increments are 10 KHZ and the FM frequency
increments are 200 kHz.
If you are in a country where the AM frequency increments are 9 kHz,
set the switch to A. In this setting, the FM frequency increments are
100 kHz.
NOTE: All stored frequencies erase when you change the switch position.
USING STEREO HEADPHONES
For private listening, connect optional stereo headphones into the
receiver's 1/8-inch jack. This disconnects the receiver's internal
speaker. Your local Radio Shack store offers a wide selection of stereo
headphones with the required 1/8-inch plug.
Listening Safely
Do not listen at extremely high volume levels, especially using an
earphone. Extended, high-volume listening can lead to permanent hearing
loss.
To protect your hearing, follow these guidelines when you use headphones.
Always start by setting the volume to the lowest level possible before
you begin listening. Put the earphone or headphones on, then
gradually increase the volume as necessary.
Once you set the volume, do not increase it. Over a period of time,
your ears adapt to the volume level, so a volume level that does not
cause discomfort might still damage your hearing.
USING THE FOLDING STAND
Your receiver has a folding stand on the back. Use it to position the
receiver more securely and for easier viewing of the display.
(ALL-02/27/95)
