DX-375 (200-0212)
Troubleshooting
Your receiver should give you years of trouble-free service if you follow the
care instructions given in this manual. If you do have problems, the chart
below might help you solve them.
Problem
Cause
Remedy
No display, or incorrect
display.
Batteries are weak or
dead.
Replace the batteries.
AC or DC adapter is
plugged into the the
receiver but not into the
power source. (Plugging
an adapter into the
receiver automatically
disconnects the
receiver's batteries.)
Connect the adapter to AC
or DC power source.
No sound.
Batteries are weak or
dead.
Replace the batteries.
Volume is set too low.
Adjust volume as desired.
Headphones are plugged
into the receiver. (This
disconnects the
receiver's internal
speaker.)
Disconnect the headphones
AC or DC adapter is not
firmly plugged in.
Ensure the adapter's
barrel is connected
properly to the receiver
and the AC or DC plug to
the proper power source.
No power from batteries. AC or DC adapter is
plugged into the receiver
but not into the power
source.(Plugging an
adapter into the receiver
automatically disconnects
the receiver's battery.
Connect the adapter to
the AC or DC power
source.
