Radio Shack 32-2058 Скачать руководство пользователя страница 4

4

The Basics

try reversing the plug. If the plug still doesn’t fit, contact your 
electrician to replace your obsolete outlet. Do not defeat the safety 
purpose of the polarized plug.

Power-Cord Protection 

— Route power-supply cords so they are 

not likely to be walked on or pinched by items placed on or against 
them, paying particular attention to cords at plugs, convenience 
receptacles, and the point where they exit from the appliance.

Cleaning

 — The appliance should be cleaned only as 

recommended by the manufacturer. Wipe it with a cloth slightly 
dampened with water. Avoid getting water inside the appliance.

Power Lines

 — An outside antenna system should not be located 

in the vicinity of overhead power lines or other electric light or 
power circuits, or where it can fall into such power lines or circuits. 
When installing an outside antenna system, extreme care should be 
taken to keep from touching such power lines or circuits as contact 
with them might be fatal. 

Nonuse Periods 

— The power cord of the appliance should be 

unplugged from the outlet when the appliance is to be left unused 
for a long period of time.

Overloading

 — Do not overload wall outlets, extension cords, or 

integral convenience receptacles, as this can result in a risk of fire 
or electric shock.

Objects and Liquids

 — Never push objects of any kind into this 

appliance through openings, as they may touch dangerous voltage 
points or short out parts that could result in a fire or electric shock. 
Never spill liquid of any kind on the appliance.  

Carts and Stands

 — If the appliance is used with a cart or stand, 

the cart/stand type should be recommended by the manufacturer. 
An appliance and cart combination should be moved with care. 
Quick stops, excessive force, and uneven surfaces cause the 
appliance and cart combination to overturn.

Mounting

 — The appliance should be mounted only as 

recommended by the manufacturer.

Damage Requiring Service

 — Unplug this appliance from the wall 

outlet and refer servicing to qualified service personnel under the 
following conditions:

Содержание 32-2058

























Отзывы: