Radio Shack 32-2058, Руководство пользователя

Страница: 10 / 24

10
The Basics
presetting audio inputs
Before mixing your audio sources (devices connected to
LINE
1, PHONO 1, PHONO 2, LINE 2
,
LINE 3, LINE 4, LINE 5, LINE 6)
, you must set
their input signal level to each channel input ( CH1 , CH2 , CH3,
etc
.
). You do not have to mix every connected input source.
1. Set the channel selector to the desired input source.
2. Play the selected input source.
3. Adjust
HIGH
,
MID
, and
BASS
as desired. See “using the
special controls” on Page 18. If you are using an external
equalizer, leave the controls set to
0 and adjust the tone
on the external equalizer.
4. Adjust the volume on your headphones (
CUE LEVEL
) or
receiver to a comfortable listening level.
All
GAIN
controls set midway
between
MIN
and
MAX
.
CH1 , CH2 , CH3 , and CH4 to 0 .
DJ MIC LEVEL and AUX LEVEL to 0 .
SEND ASSIGN
and
CUE ASSIGN
to
OFF
.
CUE LEVEL to 0 .
SEND
,
RECEIVE
, and
MASTER
set to
0.
All
HIGH
,
MID
, and
BASS
controls to
0
.