Radio Shack 32-2058 Скачать руководство пользователя страница 3

3

The Basics

IMPORTANT SAFETY INSTRUCTIONS

Read Instructions

 — All safety and operating instructions should be 

read before the appliance is operated.

Retain Instructions

 — The safety and operating instructions should 

be retained for future reference.

Heed Warnings

 — Follow all warnings on the appliance and in the 

operating instructions.

Cleaning

 — Unplug this appliance from the wall outlet before 

cleaning. Use only a damp cloth for cleaning. Do not use liquid or 
aerosol cleaners.

Water and Moisture

 — Do not use this appliance near water (for 

example, near a bathtub, washbowl, kitchen sink, or laundry tub; in 
a wet basement; or near a swimming pool).

Mounting Accessories

 — Do not place this appliance on an 

unstable cart, stand, tripod, bracket, or table. The appliance may 
fall, causing serious injury to a child or adult, and serious damage 
to the appliance. Use only with a cart, stand, tripod, bracket, 
or table recommended by the manufacturer or sold with the 
appliance. Follow the manufacturer’s instructions for mounting, and 
use a recommended mounting accessory.

Ventilation

 — Slots and openings in the cabinet provide ventilation, 

ensure reliable operation, and protect from overheating. Do not 
block or cover these openings, and do not place the appliance on a 
bed, sofa, rug, or other similar surface. Do not place the appliance 
in a built-in installation such as a bookcase or rack unless it 
provides proper ventilation as specified by the manufacturer.

Heat

 — The appliance should be situated away from heat sources 

such as radiators, heat registers, stoves, or other appliances 
(including amplifiers) that produce heat.

Power Sources

 — Operate this appliance only with the power 

source indicated. If you are not sure of your home’s power type, 
consult your appliance dealer or power company.

Polarized Power Cord Plug

 — This appliance is equipped with a 

polarized power cord plug (a plug having one blade wider than the 
other). This plug will fit in the power outlet only one way. This is 
a safety feature. If you cannot insert the plug fully into the outlet, 

Содержание 32-2058

























Отзывы: