Radio Shack 32-2058, Руководство пользователя

Страница: 11 / 24

11
The Basics
5. Slowly slide up the channel volume control (
CH
) until you
get a reading of up to
0 dB
on both LED meters.
6. Stop playback of the selected input source.
7. Repeat steps 1-7 for each audio input you plan to mix.
Notes :
• Write down the
CH
setting for each audio source. Then,
when you want to mix that source, you can adjust its
volume to that setting.
• If it was necessary to set
CH 1
to maximum to get a
reading of 0 dB or less on the LED meter, slide CH 1 down to
about
8
and adjust
MASTER
upward until you get a reading
of
0 dB
on both LED meters. If that does not work, set
GAIN midway and rotate MASTER clockwise until you get a
reading of
0 dB
on the LED meters.
presetting microphone(s)
1. If your microphone has an
ON/OFF
control, turn it
ON
.
Otherwise, set
DJ MIC LEVEL
or
AUX LEVEL
to
0
.
DJ MIC LEVEL AUX LEVEL