manualshive.com logo in svg

Radio Shack 20-162, Руководство пользователя

Поделиться
Скачать
Radio Shack 20-162 Скачать руководство пользователя страница 88

20-162

Printed in China 

UBZZ01350ZZ(0)

02A08

Hypersearch, Hyperscan, and Adaptaplug are trademarks used by 
RadioShack Corporation.
Motorola, Smartnet, and Privacy Plus are registered trademarks of 
Motorola Inc.
EDACS is a registered trademark of MA-COM Inc.
LTR is a registered trademark of EF Johnson.

Limited One-year Warranty

This product is warranted by 

RadioShack

 against manufacturing 

defects in material and workmanship under normal use for one (1) 
year from the date of purchase from 

RadioShack

 company-owned 

stores and authorized 

RadioShack

 franchisees and dealers. For 

complete warranty details and exclusions, check with your local 

RadioShack

 store.

RadioShack

 Customer Relations

300 RadioShack Circle, Fort Worth, TX 76102

04/04

www.radioshack.com 

©2008.

RadioShack

 Corporation. 

All rights reserved. 

RadioShack

 and 

RadioShack.com

 are 

trademarks used by 

RadioShack

 Corporation.

Содержание 20-162

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды