manualshive.com logo in svg

Radio Shack 20-162, Руководство пользователя, Страница: 47 / 88

Поделиться
Скачать
Radio Shack 20-162 Скачать руководство пользователя страница 47

47

Trunk Scanning

Notes:

•

You can scan only one type of trunked 
frequency, either EDACS (GE/Ericsson), 
Motorola, LTR (EF Johnson), or EDCAS SCAT 
in a bank at one time. You can, however, mix 
conventional channels and frequencies in a 
bank.

•

If you are programming trunked frequencies 
for Motorola Type I and hybrid systems, you 
must first program the fleet map (see “Type I 
and Hybrid Trunked Systems” on p. 62).

•

If you are programming frequencies for an 
EDACS system you must store them in the 
Logical Channel Number order (usually listed 
as LCN#). For example, LCN1 would go into 
channel 01 for the current bank, and LCN2 
would go into channel 02.

•

If you are programming frequencies for an 
LTR system you must store them in the home 
repeater order. For example, home repeater 
order 1 would go into channel 01 for the 
current bank, and home repeater order 2 
would go into channel 02 

Follow these steps to program trunked 
frequencies:

1.

From Scan or Manual Mode, press 

ENT/PGM

to put the scanner in Programming Mode.

2.

Press 

FUNC +

T

 or 

S

 to select a bank. Hold 

down

T

 or 

S

 to move through the bank 

selection faster.

3.

Press 

T

 or 

S

 to select a channel. Hold 

down

T

 or 

S

 to move through the channel 

selection faster.

4.

Press 

TRUNK/MODE

 to enter the Trunk ID 

Programming Mode.

Содержание 20-162

























































































Отзывы:

Нет отзывов