manualshive.com logo in svg

Radio Shack 20-162, Руководство пользователя, Страница: 33 / 88

Поделиться
Скачать
Radio Shack 20-162 Скачать руководство пользователя страница 33

33

Scanning

Activate Skywarn by pressing and holding 

WX/

.

If no frequency is programmed in the last channel, 

“Skywarn Freq. is not stored.”

 appears and the scanner 

sounds an error tone.

The scanner has 10 channels for Skywarn (Bank 
19 channels 40-49). Press 

T

 or 

S

 to select other 

Skywarn channels. Press 

MAN/MENU

 to exit 

Skywarn.

About Skywarn

Listen to Skywarn to hear trained observers in 
your vicinity call in official reports to a net control 
station which relays those reports to NOAA and 
other emergency agencies. A Skywarn group 
exists in virtually every US County with a significant 
population. During inclement weather, reports 
made by Skywarn observers include information 
about:

•

Pea-sized and larger hail

•

Wind and wind gusts of 40 MPH and greater

•

Heavy rainfall

•

Lightning (cloud-to-cloud and especially 
cloud-to-ground)

•

Wall clouds seen in severe thunderstorms 
(which spawn tornadoes)

•

Severe lowering of a wall cloud

•

Turbulence in a wall cloud

•

Funnel clouds

Содержание 20-162

























































































Отзывы:

Нет отзывов