Remote Control
View Device Codes
10
VIEW DEVICE CODES
To determine the 4-digit code for each device set up in your remote perform the following
steps:
VIEWING CODES
1. Press the desired device key (
TV, VCR, CBL/SAT or DVD)
. The red light blinks
one time.
2. Press
P
key. The red light blinks two times.
3. Press number
1
digit key. Press
P
key. Count the blinks (for example, if the red
light blinks five times the first digit in the code is 5). Write down the number.
Note:
The red light will not blink if the digit in the code is the number
0
.
4. Press number
2
digit key. Press
P
key. Count the blinks. Write down the number.
5. Press number
3
digit key. Press
P
key. Count the blinks. Write down the number.
6. Press number
4
digit key. Press
P
key. Count the blinks. Write down the number.
You can re-verify the number of blinks to identify either the first, second, third or fourth
digit in the code by repeating any of the above steps.
Press any device key (
TV, VCR, CBL/SAT or DVD)
to exit this mode. The remote
automatically exits this mode after 20 seconds of inactivity.
REASSIGNING DEVICE KEYS
You can reassign a device key (
TV, VCR, CBL/SAT or DVD)
to control any type device.
For example, the VCR key can be set up to control a second TV, or the DVD key can be
set up to control a second VCR.
Note:
You must use the device category assigned to the key to perform an Auto Search
and Manual Search.
