Need help? Call 1-888-533-7135
7
2. Press the device key for the type of remote
you are replacing (
TV
,
VCR
, or
CBL
). The red
light blinks.
3. Hold down
P
until the red light blinks twice,
then enter the 3-digit code.
For example, to replace a TV’s remote con-
trol (manufacturer’s code 185), press
TV
,
hold down
P
until the red light blinks twice,
then press
1
,
8
, and
5
.
When the red light blinks twice, the remote
control has accepted the code.
Note: If the code you entered is invalid, the
red light does not blink.
4. Point the remote control at your device and
press
PWR.
Your device should turn off (or
on, if it was off).
If the remote does not operate your device,
try the other codes listed in “Manufacturers’
Codes” on Page 13 for your brand of TV,
VCR, cable converter, or other device.
5. Repeat Steps 2–4 for additional devices.
15-1931.fm Page 7 Monday, July 19, 1999 2:26 PM