10
Operation
INSTALLING/REMOVING
THE CONTROL PANEL
The CD player's control panel must be in
place for the CD player to operate. When you
remove it, the display turns off and the CD
player cannot be used. This is a simple but
effective security measure. Any stored sta-
tions remain in memory when the control
panel is removed.
Follow these steps to install the control pan-
el:
1. Insert the left edge of the control panel
into the left edge of the recess. Make
sure the pins in the recess fill the slots in
the edge of the control panel.
2. Gently push the right edge of the control
panel into the recess until you hear a
click.
To remove the control panel, press
REL
. The
control panel swings out. Remove it and
store it in the supplied carry case.
Caution: To keep the metal connecting pins
clean, do not touch the connecting pins in the
recess or on the back of the control panel.
ˆ
Operation
Caution: Do not change your CD player’s
settings in heavy traffic or during hazardous
driving conditions.
To turn on the CD player, press
PWR
. The
buttons and display light. To turn off the CD
player, press
PWR
again.
Setting the Clock
1. Press
PWR
. Hold down
DSP
for about 2
seconds until the display flashes, then
repeatedly press
VOL +
until the correct
hour displays then repeatedly press
VOL
–
until the correct minute displays.
Note: The
PM
indicator appears at 12 noon
and disappears at 12 midnight.
Press
DSP
while the radio or a CD is playing
to display the clock. To return to the display,
press
DSP
or
BND
(while the radio is playing)
or
MODE
to choose radio or CD mode. The
CD player also automatically returns to the
Control Panel
CD Player
TRACK +
VOL +
SEL
VOL –
PWR
MODE
TRACK –
(Play)
MUTE
LOUD / RND
LOC / RPT
M/S / INT
DSP
BND
TUNE
REL
EJ
12-2158.fm Page 10 Wednesday, September 13, 2000 1:50 PM
