Digital BUS-WATCH
®
R1001 / R4001
Security
Figure 42: System – Security Screen Shot
In the SECURITY subsection of the SYSTEM section, the user can
configure the DVR Menus to only be able to be accessed by password. There are
3 levels of security: USER, ADMIN, & REI.
The USER password allows a user to access the Main Menu as shown in
Figure 31 on Page 42, but will not allow the user to access any of the SYSTEM
SETUP pages as shown in Figure 32 on Page 43. This would be useful for an
operator who needed to be able to use the remote control to play Movies or Music,
but not to change any of the recorder settings.
The ADMIN password allows the user to gain full access to all the menus,
as if there were no password protection.
The REI password is used by REI Service personnel to gain access to the
menus during any field service work or repairs. The REI password can not be
changed through the menu configuration pages, and will not be given out to end
users; however the DVRs can be sent in to REI for password resetting.
To enable password security protection, the person configuring the DVR
must enter in the password twice. If the passwords are entered exactly the same,
the person configuring the DVR will see an error message as shown in Figure 43
on Page 52.
Page 51 of 96
Radio Engineering Industries, Inc.
640370 -- Rev 0 -- 8/17/2007
