RADIKAL TECHNOLOGIES Spectralis, Руководство пользователя

Страница: 32 / 117

32
SPECTRALIS
S01:<Song 01> Pattern:<Patt01> Tempo:120
C:Kick S:TR-Alike 808Deep <Vol>
C:Kick
Using the first Encoder you can now select the sound-category.
If you want to stick with the Category ”Kick” the Spectralis will offer you a
selection of sounds (in this case ONLY Kicks), which are part of this category.
By setting the category to "ALL" you can select all drum sounds stored in
the machine.
S:TR-Alike
Using the second Encoder you can select another subcategory. Subcategories
allow to make a kind of preselection for your sound search. If you for example
are looking for TR-909 kicks, select TR-Alike and the Spectralis will list all sounds,
taken from the TR-family of drumcomputers.
808Deep
The third encoder selects the sound itself. The sound you are selecting will will not
be loaded until you push down the encoder button. That is necessary for all sample-
based sounds to avoid unnecessary sample loading during your sound search.
But you can overcome this by simply hitting the [page-up] and [page-down]
buttons for selecting and activating a samplebased sound. That often also
works faster than the rotary encoder function. By selecting subcategory "All"
in advance, you can switch through the entire range of kick drums available
on your machine.
<Vol>
Using the fourth encoder you can determine the Volume of the new sound. Currently
(version 097L) this encoder has no function. But you can adjust the volume
in the volume mixer by hitting
[Volume] in the mixing desk section and
dialing the encoder of the desired part.
3.1.7a The pattern transpose function"How to...?"
The Pattern transpose function is now enabled in pattern jam mode as well.
Just play a pattern, hit and hold the
[Transpose] -button and hit another note on
the mini-keyboard of the spectralis. The pattern and all arpeggiator motifs will
get transposed then.
"How to...?": "Pattern-Jam"-mode