3
1.
Explanation of the symbols and safe work instructions
1.1
Introduction
These technical instructions contain important information about adequate assembly,
commissioning, handling and maintains of the device.
It is intended for authorized installers, authorized service technician’s and end – users of the
electro-boiler.
Please read and retain the instructions for future reference in case of need.
1.2 List of symbols with explanations
Warning symbols
RISK OF ELECTRIC SHOCK
Risk of electric shock symbol is presented by a lightning bolt arrow in a triangle
warning symbol
WARNING
Warning symbol in the text is presented by the warning sign in a triangle
IMPORTANT INFORMATION
Important information for which there is no risk of injury or material damage
SETTINGS
Settings intended for service technicians or experts and end user should not
perform them by themselves.
Key words at the beginning of the safety notice denote the type of hazard and potential
consequences if one does not comply with the measures for preventing hazard.
-
NOTE
indicates that there might be some material damage.
-
CAUTION
indicates that there might be minor or moderate bodily injuries.
-
WARNING
indicates that there might be severe or life-threatening bodily injures.
-
DANGER
indicates that might be life – threating bodily injuries.
1.3 General boiler safe work instructions
General safety instructions
This device is not intended for use by persons with limited mental or psychophysical
capabilities, as well as by inexperienced persons including children. Children above 8
may handle this device only if an adult is present or if they are instructed for date
handling and are aware of all hazards.
Non-compliance with the safe work instructions may result in severe injuries, death,
material damage, and may jeopardize environment.
Before assembling the boiler professional inspection and control testing of the
electrical installation is required.
All works on the electrical installation should be performed by a competent and
authorized person in accordance with relevant regulations.
Commissioning, maintenance and repair may only be performed by an authorized
service technician.
