43
Radijator Inženjering DOO, 36000 Kraljevo, Živojina Lazića Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150,
, e-mail: [email protected]
Figure 3a.
AC motor and Turbulators
Figure 3b.
Electro motor, screw conveyor for ash and ash bin
The efficiency of the pellet is over 92%. In normal mode, the flue gas temperature at the exit
is around 145 °C, while in maximal modes and with an increased level of dirt on the exchanger
it is below 200 °C. These values may be read on the display at any time. During operation, soot
and ash deposit in the exchanger part of the boiler, which results in a significant decrease of
heat exchange and the increase of flue gas temperature. If the boiler is not cleaned over a longer
period of time, the flue gas temperature may become so high that the boiler enters a modular
mode of work. The
BIOmax PRO
boiler has a copper heat exchanger for thermal safety. All
parts of the water portion of the boiler are produced of seamless pipes of
ST 35.4
quality and
boiler sheets with a thickness of 5 mm. Sheets correspond to the quality prescribed by
1.0425
EU
standard i.e.
P265GHEUII
standard
.
