Connecting the WiFiHU2 or WiFiHU2-NE to Your System
rior to connecting the WiFiHU2 to a Window XP, the drivers should be installed. The
iFiHU2 Modules are designed for easy connection to any standard USB Port and
even
E
ounted onto a USB hub PCB (WiFiHU2-NE). To remove the
y
ance, we recommend using two antennas to meet MIMO
st
sest
P
W
wireless network. Connect one end of the USB cable into the USB connector on the
WiFiHU2-NE and the other into any available USB receptacle on your computer. The
WiFiHU2-NE’s “Hot Swap-able” interface allows you to plug or unplug the module
when the computer is on. If using Windows, load the provided drivers. The WiFiHU2-N
is now ready for use.
If you plan to embed the WiFiHU2 into your system, the initial evaluation consists of the
iFiHU2 USB Module m
W
WiFiHU2 carefully remove it from the two 8 pin headers on the WiFiHU2-NE USB
interface board. Save this interface board. The WiFiHU2 can always be reinstalled into
the WiFiHU2-NE USB interface board and connected to any standard USB port to verif
or test the module functions.
If you use external antenna, connect one end of Radicom approved antenna to the on
oard socket.
For ultimate perform
b
requirement with
exceptional reception and throughput
. If only using one antenna, you mu
use the correct antenna socket for good performance. Connect single antenna to the socket clo
to the Radicom Research white silkscreen legend on the PCB.
7
