RS-
330/332 Operators’ Manual – Revision 2.00
INTRODUCTION
Radiation Solutions Inc
– Proprietary
Page 2
Revision Date: May 16, 2017
1.1 FEATURES and SPECIFICATIONS
-
RS-330
–
3
” x 3” (21ci 0.35L)
Sodium-Iodide (
NaI
) detector provides high sensitivity performance
due to the large crystal. Energy response is from 15keV - 3000keV.
-
RS-332
– a special model with a
2” x 2”
(
6.3ci - 0.1L
) Bismuth Germinate Oxide (
BGO
) detector
with an internal collimator for special applications. Energy response is from 30keV - 3000keV.
-
Sensitivities (1 MBq
Cs-137
@ 1m):
RS-330
=
386 cps, RS-332
=
160 cps
-
Large Graphic
Color
Transflective
LCD
display
3.
5” (90mm) diagonal and 360 x 240 pixels
which ensure excellent readability in any outdoor conditions.
-
Gyro stabilized screen
-
Automatic light sensor that changes the standard Color screen to a Monochrome screen at higher
light levels to permit easy readability even in strong sunlight
-
Simple operation with a five-position
navigation joystick
with illuminated buttons
-
Memory capacity
– can store 8Gb (approximately
2000 samples
) of spectra, assay results, GPS
coordinates and voice recordings.
-
USB
and
WiFi
connection
-
Integrated
GPS
.
-
Integrated
microphone
for voice recording
-
Internal rechargeable
Li-ion battery
module.
-
Typical
10+ hour
battery life at 20
0
C.
-
Size
–
RS-330
- Diameter = max
4.9” (124.5mm) – Height = 21.2” (538.5mm)
-
Size
–
RS-332
- Diameter = max
4.9” (124.5mm) – Height = 18.1” (459.7mm)
-
Weight
–
RS-330
- 4 kg,
RS-332
= 8 kg
-
Operational Temperature range
-10 to +50
0
C
(limited by the display readability).
-
IP65 weatherproofing
– short term water immersion and fully dust protected.
-
Strong aluminum casting construction, integrated detector, rubber shock absorber and thermal
isolation.
-
Well balanced, easy to hold and designed for easy operation in field conditions.
-
New design state-of-the art electronics with advanced CPU capability with a fully digital
spectrometer design
-
Unique spectral analyze method, calibrated for different geometries and application. Measuring
methods and Calibration are User Programmable.
-
Energy compensated dose rate measurement.
-
Automatic energy calibration based on natural background radiation.
No external radioactive sources required for stabilization.
NOTE: The following acronyms are used for the remainder of this manual;
Sodium Iodide
(NaI)
detector
Bismuth Germinate Oxide (
BGO
) detector
D-1036 REV 02.00 Status: RELEASED printed 16/05/2017 9:45:26 AM by Radiation Solutions Inc.
