RS-
330/332 Operators’ Manual – Revision 2.00
DATA STORAGE and PC CONNECTIONS
Radiation Solutions Inc
– Proprietary
Page 27
Revision Date: May 16, 2017
6.1.3 Survey Log
The Survey logs; consists of survey and analysis results. Once in this mode then pressing
OK
gives
additional options:
CONTINUE
– this goes back to the previous display
RELOAD
– reloads the data into the database for display and selection.
GRAPH
– select Graph from the Menu, then press
OK
and the selected data file is shown as a
graphical display with custom section.
Pressing
OK
will open a submenu of tools; the selections being Continue, Autoscale, Zoom and
Back to menu.
BACK TO LOGS
– back to the Logs menu. .
6.1.4 Stabilization Log
The stabilization log offers a table of the most important stabilization inputs and outputs. There are in
columns: Index, Date, and Time of stabilization event and stabilization result. The stabilization result is
OK
when unit’s gain is corrected but any stabilization errors will have a message. The next six columns are
used for detailed information about peak differences in channels of nominal peak position, information
about high voltage adjustment before and after stabilization and fine gain adjustment before and after
stabilization. The information is primarily for specialist support. In case of problems, RSI may ask for the
Stabilization Log to be emailed
– see PC connections below.
Once in this mode then pressing
OK
gives additional options:
CONTINUE
– this goes back to the previous display
RELOAD
– reloads the data into the database for
display and selection
BACK TO LOGS
– back to the Logs menu.
D-1036 REV 02.00 Status: RELEASED printed 16/05/2017 9:45:26 AM by Radiation Solutions Inc.
