39
HR-501 AED User Manual
READ
Y
USE
MANA
GEMENT
O
THER
6.Troubleshooting
6.1 Self-diagnosis
For various kinds of self-diagnosis tests and more details, refer
to the following table as shown below.
If the product fails in self-diagnosis test, status light blinks in red
and beeper sounds a warning. In this state, the product does
not operate properly. If the product does not operate properly,
users should refer to 6.3. Troubleshooting in the manual.During
periodic self-diagnosis, if product trouble is found, status light
blinks in red; in case of power on by pushing power button, beeper
sounds 3 times every second for warning with error audio guidance.
It implements every time battery is replaced. The
product conducts test at the time of initial battery
installation after purchase or battery replacement.
During self-diagnosis test, users must follow the
audio guidance. If problem found on the product
during diagnosis test, status light blinks in red
while button blinks in red. Users may refer to
6.3 troubleshooting of the manual.
The product at standby mode conducts
self-diagnosis test in monthly (battery, inner circuit)
bases. Periodic self-diagnosis tests inspect major
functions including battery status and inner circuit
to be saved in internal memory.
The product is turned on by pushing power
button.
Battery pack
self-diagnosis test
Battery pack
self-diagnosis test
Periodic
self-diagnosis test
