6
•
Always make observe the minimum distances from walls, furniture and/or objects, as indicated in picture 4. Never install
the product so that the distance between the floor and the lower side of the product is less than 30cm:
-
Remove the wall-mounting bracket fixed to the back of the radiator, by releasing the 2 lower springs;
-
Use a pencil to mark the position of the fixing points (picture 5).
-
Drill the 4 holes at the points marked previously, and insert the plastic anchors;
-
Fix the bracket to the wall using the 4 screws supplied (picture 6);
-
Hook the radiator to the bracket starting with the 2 upper fixing points, and then click the 2 lower fixing points into
position (picture 7);
-
Should you have to remove the radiator from the bracket at a later stage, we recommend releasing the lower two
fixing points first and then the upper fixings.
4.
TOWELS
•
Always outspread the towels over the support bars (picture 8-A);
•
Do not place the towels on top of the product (picture 8-B);
•
Do not roll up the towels between the bar and the front surface (picture 8-C).
5.
Command description and functioning
•
The following controls are available on the front panel (picture 9):
A - Stand-by
B - Increase
C - Decrease
D - Mode
E - Display
The product can be operated in 3 different modes: automatic, programmed or frost free.
Automatic Mode
In this mode the product works to reach and maintain the Comfort temperature set by the user. An automatic power manage-
ment system allows optimum control of consumption and precise adjustment of the comfort level automatically maintaining the
selected temperature constant over time, in accordance with what has been set on the electronic thermostat.
In automatic mode is also available a special feature, which is activated at user’s choice, which allows to detect the possible
opening of a window and force the functioning to the Frost free mode to minimize energy waste.
Programmed Mode
The product can be programmed, on hour base, for each day of the week. For each hour of the day it is possible to define
the reference temperature to be reached/maintained, choosing between Comfort, Eco (whose value is equal to the Comfort
temperature reduced by 3,5°C) or Frost free.
In programmed mode the open window detection function is disabled so that the product can correctly follow the
temperature profile defined by the user.
Frost free Mode
In this mode the thermostat is automatically set to maintain 7±3°C.