10
WEEKLY PROGRAM
The Programmed mode allows to set, for every hour of day and for every day of the week independently, the desired tempe-
rature choosing between the Comfort, Eco (equal to that of Comfort decreased by 3.5 ° C) or Frost-free.
To activate the Programmed mode, press the
M
key until the display shows "Pr".
If the product is brand new the default
program is the following:
Always Frost-free mode except Comfort mode in the following hours:
- from 06:00 to 08:00 on Monday-Friday;
- from 08:00 to 10:00 on Saturday-Sunday.
When in Programmed mode you can display/modify the program
by pressing the
and
keys together.
The display shows day 1 (Monday).
By pressing the
and
keys, the different hours of the day
are displayed starting from “00” (time between 00:00 and 00:59).
The reference temperature set for the selected time is indicated
by turning on the antifreeze icon (temperature of 7 ° C), the Eco
icon (Eco temperature = Comfort - 3.5 ° C) or the Comfort one
(Comfort temperature set by the user).
The desired temperature can be changed by pressing the
M
key. The lighting in sequence of the icons described above indi
-
cates the reference temperature.
Use the
and
keys to view/modify the temperature set
for each of the hours of day 1, from 00 to 23.
At 11 pm (23), pressing the
key again allows access to the
programming for day 2.
Now it is possible to choose whether to display/modify the tem-
perature of the single hours of day 2 or set day 2 identical to day
1. In the first case, use the
and
keys as already descri-
bed for day 1, in the second just press again the button
M
. By
doing so, day 2 is automatically set equal to day 1 and the system
moves to the beginning of day 3. This procedure can be repeated
until programming for day 7.
At the end of the programming on day 7, or in any intermediate
phase of the programming, after pressing the
key, you ac-
cess the program saving phase. The message “OK” appears on
the display and the program just defined is stored.
Note:
- At any time it is possible to abandon the viewing/modification procedure by deleting the modifications not yet saved
by waiting 30 seconds without touching any key;
-During the programming the heating elements are disconnected and the product doesn't heat.
