Radial Engineering B-RAD X 7000, Руководство пользователя

Страница: 9 / 28

CAUTION!
Only operate the B-RAD X Tool System if the following storage and operation
conditions have been met.
!
WARNING!
The vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used.
Identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all
parts of the operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
CAUTION!
It is recommended that the operator wears hearing protection.
!
!
User manual
B-RAD X
V1.0 - May 2023 9
1.2.3. Environmental Specifications
All Models
0 C 0 F
Ambient Operating Temperature Range
0 – 40 32 – 104
Storage Temperature Range
-20 – 70 -4 – 158
Required Operating Conditions Non-explosive atmosphere, dry location
Humidity 10% to 90% non-condensing
Shock 10G according to DIN IEC 68-2-6/29
Vibration Emission / Uncertainty = K Does not exceed 2.5 m/s² ; K = 1.5dB
Noise Emissions
A-weighted sound pressure level - LpA Does not exceed 75dB(A)
w
Uncertainty = K 86.0dB(A); K = 1.51dB
Table 1.2.3-1: Environmental Specifications
Note: The declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing one tool with another and may be used in a preliminary assessment of
exposure.
1.2.4. Cycle of Operation
A Cycle of Operation or a Tool Cycle as used in this manual is defined as:
• 10 seconds On (Forward or Reverse)
• 5 seconds Off
Note: the “on” here is defined as where torque is applied to the system.
Note: An actual Torque Cycle may vary from the general definition above.