Radial Engineering B-RAD X 7000, Руководство пользователя

Страница: 10 / 28

1
2
6
4
3
7
5
CAUTION!
The Display Module may be damaged by mechanical shock, electrostatic
discharge, excessive force, moisture, or extreme temperatures. Avoid such
conditions and gently wipe clean or let dry before use.
!
User manual
B-RAD X
V1.0 - May 2023 10
2. Tool System
The following sections introduce the operation of the Tool Handle, Reaction Arm, LED Display Interface,
RAD HD Battery Pack, and RAD Battery Charger.
2.1. Tool Handle
The B-RAD X (Figure 2.1-1) is activated with a Trigger Switch. Torque values and tool information are
displayed on 5-digit LED display. Four buttons are used to enter the desired torque setting and view the
menus. The RAD HD Battery Pack is attached to the bottom of the Tool Handle.
1. Trigger Switch – tool activation
2. LED Display Module with 4 Buttons – refer
to Section 2.2 Tool Interface
3. RAD HD Battery Pack – refer to Section
2.3 RAD HD Battery Pack
4. Battery Release Button and Lock - refer to
Section 2.3.1 Insert/Remove the RAD HD
Battery Pack
5. Reaction Arm
6. Fan Filter
7. Hand Guard
8. Hanger (not shown)
9. Snap ring (not shown)
2.2. Tool Interface
To turn on the LED Display, attach the RAD HD Battery to the B-RAD X handle and press the Trigger
Switch momentarily.
The LED Display has a 5 digit display to show the torque values and menu options, LEDs for indicating
both forward and reverse directional rotation, LEDs to indicate the type of Units the tool is operating in, and
4 buttons that can be used to change settings and navigate menus.
The Trigger is disabled when entering the menu system. Only certain sub menu systems will allow the tool
to operate.
The entire tool will shut down after 10 minutes of inactivity. To turn the tool back on, press the Trigger
Switch once and the system will restart.