User manual
B-RAD X
V1.0 - May 2023
16
3.3. Basic Level Menu Options
The Basic Level Menu Options are limited to the Lock Menu and the Information Menu.
3.3.1. Information Menu
The Information menu displays values for Gearbox, Torque Units, Low End, High End, Serial Number and
Firmware Version.
To review Information:
1.
Long press Enter until the display changes from displaying torque value to “inFo”. This is the
start of the menu system.
2. Short press
Enter
to view the Information Menu.
3. Use the / buttons to navigate to the desired information item and press the Enter button.
4. The selected information will display and scroll across the LED Display.
Note:
When the user is in the info menu, the Trigger is disabled.
To return to the Main Menu, press
Back
twice. Press
Back
twice again to exit the menu system and return
to the Main Screen.
Note:
For a visual representation of the menu layout and how to get here see Section 3.6 Menu Tree –
Overview.
3.4. Advanced Level Menu Options
The Advanced Level Menu Options are limited to the Basic Level Menu options (see Section 3.3) as well as
the Confi guration Menu options, and the Statistics Menu.
3.4.1. Confi guration Menu
The B-RAD X’s confi guration menu contains all the values that defi ne how the tool behaves during a
Torque Cycle. Values that can be set from the Confi guration menu include
Units, Display Brightness,
2-Handed Safety Settings, Back-off settings, Calibration Settings,
and
Audio Indication settings.
To navigate to the configuration menu:
1. Long press the
Enter
button to bring up the Main Menu.
2. Use the / buttons to navigate to “conFG”, press
Enter
.
Note:
For a visual representation of the menu layout and how to get here see Section 3.6 Menu Tree –
Overview.
3.4.2. Change Torque Units
See Section 3.4.1 Confi guration Menu to navigate to the sub-menu this option is located in.
The Units menu is used to toggle between ft·lb (foot-pounds) and N·m (newton-meters).
To change torque units:
1. Use the / buttons to navigate to the Units menu.
2. Use the / buttons to toggle between ft·lb (foot-pounds) and N·m (newton-meters).
3. Press Enter to save a selection. Notice that the LED Display has changed to refl ect the unit selection.
Note:
For a visual representation of the menu layout and how to get here see Section 3.6 Menu Tree –
Overview.
Содержание B-RAD X 7000
Страница 26: ...NOTES User manual B RAD X V1 0 May 2023 26...
Страница 27: ...NOTES User manual B RAD X V1 0 May 2023 27...
