13
EN
(10)
(18)
5
6
(8)
(19)
(7)
7
7.4 Mounting / dismantling the adapter (10)
Mounting the adapter (10)
1.
Slide the adapter
(10)
over the magnetic ring
(18)
on the drive head until it engages. In doing so, check
the correct positioning of the groove in the adapter
(10) (original factory settings)
.
Dismantling the adapter (10)
1.
Press the two retaining springs on the magnetic ring
(18)
downwards and pull the adapter
(10)
off the
magnetic ring
(18)
.
Press the retai-
ning springs
downwards.
7.5 Dismantling the catch (8)
The catch (8) can be mounted with or without
the freewheel mechanism.
The factory pre-setting for the catch is
“
with the freewheel mechanism
”.
The catch
(8)
must first be dismantled before
changing the mounting mode.
1.
Press the side parts of the retaining clip
(7)
togeth-
er and pull the catch
(8)
off the drive adapter
(19)
.
