2
INTRODUCTION
The Rada bsr-s 300 is a shower fitting, precision engineered to give a satisfactory
shower at pressures between 0.06 bar and 4 bar. The fitting has a short shower arm
that is suitable for connection to concealed pipework and it incorporates an adjustable
spray head that can deliver three different spray patterns.
DESCRIPTION
The shower fitting comprises a shower arm made from chromium plated copper alloy
and a chromium plated plastic shower head. The shower arm incorporates a ball
joint that allows the shower head to pivot 20 in any direction. The shower fitting is
supplied complete with a metal wall plate and fixings and is suitable for installation
to a solid wall, shower cubicle or laminated panel with a concealed pipework supply.
The shower head is fitted with a low capacity spray plate suitable for pressures
between 0.06 and 0.09 bar. A high capacity spray plate is included to allow more
flow and is recommended for use with gas water heaters.
SAFETY : WARNINGS
Rada products are precision-engineered and should give continued superior and
safe performance, provided:
1.
They are installed, commissioned, operated and maintained in accordance with
the recommendations given in this Manual.
2.
Periodic attention is given, as necessary, to maintain the product in good
functional order. Recommended guidelines are given in the
MAINTENANCE
section.
3. Cleaning:
Many household and industrial cleaning products contain abrasives
and chemical concentrates and should
not
be used for cleaning plated or plastic
surfaces. These finishes should be cleaned with a mild washing up detergent
or soap solution, and then wiped dry using a soft cloth.
4. Safety:
Anyone who may have difficulty understanding or operating the controls
of any shower should be attended whilst showering. Particular consideration
should be given to the young, the elderly, the infirm or anyone inexperienced in
the correct operation of the controls.