Raco Verbatim, Руководство пользователя

Страница: 61 / 246

Advanced Programming
Verbatim Owner's Manual 6-21
6.2.13 Alarm Call Grouping
This is a programming step that “links” selected channels to selected dialout
phone numbers, so that when a given channel goes into alarm, only the phone
numbers “linked” to that channel will be dialed. Ordinarily, an alarm on any
channel will cause dialing of the entire list of phone numbers.
Alarm Call Grouping is typically done when certain channels are associated
with a specific category of personnel, such as electrical, plumbing, security, etc.
However, Power Failure to the Verbatim autodialer causes dialing of all phone
numbers. If you need to limit Power Failure alarm calls to selected numbers:
1. Turn off the regular Power Failure alarm function using code 9 2 1 0,
(described below)
2. Then connect an unused input channel for power failure monitoring, using
the contacts of a relay.
To program for Alarm Call Grouping:
1. Enter your phone number. It is important to first write in your entire list
of phone numbers on Programming Worksheet A in Appendix J.
Note:
There is a 2-digit “Designation Number” on the Worksheet associated with
each phone number (01 for the first number, etc.). This number corresponds
with the 3-digit program code for entering phone numbers (701 for the first
number, etc.).
2. Group them by using code
5 ZZ 9 DN.
Begin by filling in
Programming Worksheet B in Appendix J.
Refer to the filled-in examples for guidance. The right-hand column will
now contain the actual program code strings which you should now enter,
terminating each string entry with the ENTER key.
For example, to link channel 1 to the second and fifth phone numbers,
following the filled-in example, you would press:
5 01 9 02 05 ENTER
3. Phone numbers will always be dialed in ascending order of the 2-digit
Designation Numbers, regardless of their order in your program code
entry. Note that an alarm on any channel that is not “linked” with a
program code entry will cause dialing of the entire list of phone numbers.
u
To read the linkage programming on channel ZZ, press:
5 ZZ 9 ENTER