EPS 02 with TTL to USB
communication cable
EPS 02 mounted behind motor brake with
extended shaft in submersible housing
External EPS 02 setup via IP68 plugable
TTL to USB connection cable
service computer. Parameter sets can be
stored and read via the “Values” control bar
pull down menu at the top of the screen on
the hard drive. To store the changed data
from the screen into the EPS02, the “Send
Parameter Block” button needs to be pushed.
This refers to all configuration screens.
Reed switch sector:
The
reed switch sector
display block is for diagnostic and functional
supervision of the imbedded reed switches.
Absolute position:
The absolute position
indication is a calculated value out of the
predefined “Number of Turns for max
Stroke”, the “Cylinder max Stroke” values,
and the selection of the “Set zero Position”.
The slide bar output and numerical value is
updated immediately as the sensor changes
its rotational position.
