1. SAFETY INSTRUCTIONS
IMPORTANT
Read carefully before use
Keep for future reference
Safe operating practices
Training
Become familiar with the owner’s manual before attempting to operate the equipment.
Preparation
a) THIS HEDGE TRIMMER CAN CAUSE SERIOUS INJURIES. Read the instructions carefully for the
correct handling, preparation, maintenance, starting and stopping of the hedge trimmer. Become familiar
with all controls and the proper use of the hedge trimmer.
b) Never allow children to use the hedge trimmer.
c) Beware of overhead power lines.
d) Avoid operating while people, especially children, are nearby.
e) Dress properly! Do not wear loose clothing or jewellery, which can be caught in moving parts. Use of
sturdy gloves, non-skid footwear and safety glasses is recommended.
f) Use extra care when handling fuels. They are flammable and the vapours are explosive. The following
points should be observed:
Use only an approved container.
Never remove the fuel cap or add fuel with the power source running. Allow engine and exhaust
components to cool down before refuelling.
Do not smoke.
Never refuel indoors.
Never store the hedge trimmer or fuel container inside where there is an open flame, such as near a
water heater.
If fuel is spilled, do not attempt to start the power source, but move the hedge trimmer away from
the spillage before starting.
Always replace and securely tighten the fuel cap after refuelling.
If the fuel tank is drained, this should be done outdoors.
g) If the cutting mechanism strikes any foreign object or the hedge trimmer starts making any unusual noise
or vibration, shut off the power source and allow the hedge trimmer to stop. Disconnect the spark plug
and take the following steps:
inspect for damage;
check for, and tighten, any loose parts;
have any damaged parts replaced or repaired with parts having equivalent specifications
h) Wear ear protection.
i) Wear eye protection.
j) In case of emergency, stop the hedge trimmer; release the trigger, switch off the tool with the ON/OFF
button. Let it completely stop and be cool before any intervention.
Operation
Use the tool for the intended purpose and follow these provided instructions for use and maintenance
a) Stop the engine before:
cleaning or when clearing a blockage,
3
