checking, carrying out maintenance or working on the hedge trimmer,
adjusting the working position of the cutting device,
Leaving the hedge trimmer unattended.
b) Ensure that the hedge trimmer is correctly located in a designated working position before starting the
engine.
c) While operating the hedge trimmer, always ensure that the operating position is safe and secure,
especially when using steps or a ladder.
d) Do not operate the hedge trimmer with a damaged or excessively worn cutting device.
e) To reduce fire hazards, keep the engine and silencer free of debris, leaves and excessive lubricant.
f) Always ensure that all handles and guards are fitted when using the hedge trimmer. Never attempt to
use an incomplete hedge trimmer or one fitted with an unauthorized modification.
g) Always use two hands to operate a hedge trimmer fitted with two handles.
Maintenance and storage
a) When the hedge trimmer is stopped for servicing, inspection or storage, shut off the power source,
disconnect the spark plug wire from the spark plug and make sure all moving parts have come to a stop.
Allow the hedge trimmer to cool before making any inspections, adjustments, etc.
b) Store the hedge trimmer where the fuel vapour will not reach an open flame or spark. Always allow the
hedge trimmer to cool down before storing.
c) When transporting or storing the hedge trimmer, always fit the cutting device transport guard.
Additional instructions
- WARNING - Children should never use this hedge trimmer.
- Work only during the day or with sufficient artificial light.
- Use the machine only at reasonable times - not early in the morning or late at night when people might
be disturbed;
- Before starting to work, check that the tool is in good working order.
- Make sure all parts of the machine are secure and tight.
- Check regularly that the blade is in good condition.
- Always hold the hedge trimmer firmly with both hands.
- Never hold the hedge trimmer by the blade.
- Keep clothing out of the reach of the blade.
- Check that the work area is free from all forms of obstacles and hazardous materials.
- Work carefully, do not be distracted.
- Do not work under the influence of alcohol or drugs or medication as this may interfere with your reflexes
and reactions. There is a great risk of accidents and injuries.
- Do not use the tool if you are tired.
- In the event of blockage, immediately turn off the tool with its switch. Let the tool cool down. Correct the
fault before resuming work.
- When a danger or an unforeseen situation may arise, stop working immediately and switch off the tool.
Restart the operation when there are no more obvious dangers and it is safe to work.
- Cut large branches first with hand shears to prevent the blade from jamming.
- Be careful not to cut wire or other similar material.
- Use only accessories supplied and recommended by the manufacturer.
- Use only the oil / gasoline mixture recommended by the manufacturer.
- Store the mixture in a specific container for gasoline.
- Keep the appliance in a fairly dry place and out of the reach of children.
- Be sure to stay away from the exhaust of gases to avoid the risk of burns.
- Keep people and animals away from the work area.
4
