910212- Battery Powered Rail Drill
racinerailroad.com
racinerailroad.co.uk
6.2023 Rev.1
Original Instructions
© 2023 Racine Railroad Products
Page
13
of
21
Shoe Installation
There are two kinds of shoes used with the
power drill:
Tool A
Tool B
1. Place the shoe though the pins and put
the bolt into the middle hole.
2.
Fasten the bolt with 8-mm hex key.
Cooling System
1. Add 5 liters of coolant into the bottle.
2. Insert the coolant pipe into the plug
connector on the side of the drill.
3. Push air into bottle by pressing the top
handle.
4. Open the cooling system outlet valve to
let the coolant flow in.
