910212- Battery Powered Rail Drill
racinerailroad.com
racinerailroad.co.uk
6.2023 Rev.1
Original Instructions
© 2023 Racine Railroad Products
Page
14
of
21
Template Installation
The template can be applied to rail steel 43,
50, 60, and 75.
1. Move the slide spacer to select the rail
type and lock the slide spacer.
2. Place the side of the stopper template
against the top of rail steel.
Starting the Drill
1. Power ON the battery.
2 . Press the switch at the side of drill for 10
seconds to power on the drill.
3. Check that the drill is operating correctly (no
abnormal noise).
Power Switch Location
LCD Display
•
Press the Function Key for 1 second to power ON the display.
•
Press the Function Key for 2 seconds to switch between high
rpms and low rpms.
•
Press the Function Key to check the amount of holes to drill
and battery level.
