6
fit in. Once again glue the nubs and slots and apply some pressure to get a snug fit.
Allow the glue to fully sets before you proceed.
The last step in the assembly is to glue the nine vertical planks (
E 1-9
) to the four
horizontal beams. Each of the planks have four slots where the nubs of the four
horizontal beams must be glued in. Apply some glue and then some gentle pressure
to ensure that all fits snugly and allow the glue to set properly.
The artwork can now be fixed to the vertical planks.
FINISHING & BRANDING
We leave the finishing to your imagination and your taste. Do whatever you think will
transform this into a structure that will compliment your race track diorama. We have
included the artwork that can be glued to the structure. This artwork can be protected
with a clear spray.
CONCLUSION
We sincerely hoped you have enjoyed this assembly and finishing. Please remember
to give us some feedback and either send or post some pictures of this product on
your track.
