2
part of the finished product.
In the section “FAMILIARIZE YOURSELF” below, you
will find diagram(s) that identify and explain each piece (component) that you are
about to assemble. In the section
“PREPARING THE CUT PIECES” below, you will
learn how to proceed to prepare the pieces for assembly.
In the kit you will also find some optional pre-cut artwork printed on matt photo
paper. This can be used to brand your finished product.
WHAT YOU WILL NEED
We have specifically designed this product so that it is easy to assemble with only a
few basic tools. You will need the following:
a screwdriver
a sharp hobby knife
some glue
a few toothpicks
a few earbuds can be handy
a paintbrush or sponge roller and paint or a rattle can or two with spray paint.
There are really two schools of thought as to the right glue to use. Some people
prefer a rapid setting glue like most gel super glues, while others prefer a slower
setting glue like ordinary cold wood glue (pva glue). Sometimes more than one part
must be assembled almost simultaneously and then a forgiving glue makes life a bit
easier. Gluing the 26 steps into place may take a bit of time when you do it for the
first time and a slower setting glue may just make life so much easier. Other times
you may want a quick fix and then the rapid setting glue is the obvious choice. Our
advice is to see what works best for you, there are no right or wrong, both types will
produce a sturdy structure.
You will only need a small amount of glue and remember to look for the surfaces that
will be in contact in the end and do not only apply glue to the lugs and sleeves. The
latter restrict movement in one plane, but the glue fix it in the perpendicular plane.
Using a toothpick is a handy way to apply glue and an earbud can be used to dab
away any excess of glue (especially if you use wood glue).
If parts must be at a right angle, you can use any object to assist you in obtaining a
square finished product in the end.
