race result AG
Joseph-von-Fraunhofer-Straße 11, 76327 Pfinztal
Germany
+49 (721) 961 409 01
On (Solid) - Passive reader active
On (Flashing Rapidly) - Passive reader active and detecting transponders
Off - Passive reader switched off
to understand the conditions in which the passive
reader will be switched off
Button
Press button to switch on.
Keep the button pressed for 1 second to turn off. If the Track Boxes are stacked, or very
close to each other, they will send a shutdown command via 2.4GHz to shut down all boxes
in the stack.
You can reset the Track Box by pressing the button for 10 seconds.
If the Track Box is locked via
Tracking Box Configuration Rules
, the LED will not blink at all
and the button won't turn off the box. You can still reset the box by pressing the button for
10 seconds.
Beeper
The internal beeper will signal a passing similar to the decoder beep. While the decoder
beeps as soon as a transponder is in range, the Track Box Passive beeps when the
actual passing has been created.
When you hear a continuous beep and see the box blinking red/green, it signals a fatal error
(see above).
Error Codes
An error code (indicated by a continuously flashing red/green LED) can indicate one of two
possibilities.
Strong reflection in front of the antenna - no beep
In most cases, an alternating red/green LED indicates a strong reflection in front of the
antenna and you should check the surroundings of the box.
This can be anything in front of or around the Track Box, Most commonly (too much) metal,
but it could be simply a person standing in front of the Track Box. You can easily test this by
