- 3 –
www.racediagnostics.com
rev1.01
30/04/2008
Installation Instructions
First, remove the air vent that is desired as the mounting position for the liquidTT.
The easiest way to remove the air vent is by pulling the vent with two hands with your
finger nails behind the air vent control wheel as shown below. As the vent is a simple
push fit, it will come out without any real problem.
Once removed, you can see the air ducting behind the opening.
To prevent hot or cold air from the HVAC system leaking behind the dash the air duct
must be capped. Cut a piece of 2 to 3cm foam rubber slightly larger than the air duct
opening size and fit into the duct, taking care not to block the duct behind to the other
vent.
