- 6 –
www.racediagnostics.com
rev1.01
30/04/2008
Detach the string from the cable-tie and tie to the 9-pin D connector of the OBD
cable. Next, gently start to pull the sting back through the air vent opening, pulling the
OBD cable back up with it. The cable will snag on the way, each time it snags, pull
the OBD cable back down a few centimetres and gently rotate the OBD cable.
Eventually the 9-pin D connector will emerge from the air vent opening.
Untie the string from the cable and attach to the liquidTT module, screw the cable
screws into the connector on the liquidTT module.
