Racal Instruments AN/TRC-207, Инструкция по эксплуатации и обслуживанию

Страница: 23 / 102

TO 31R2-2TRC207-1
2-3
e. Store all packing materials (except the desiccant bag) in shipping container and store shipping container
for re-use. New desiccant material must be used when repacking.
f. Inspect top and bottom, both sides, and front and rear panels of equipment for dents, scratches or any
visually identifiable damage.
g. Inspect controls and indicators on control panel for missing, broken or cracked knobs or levers and note
any discrepancies on Receiving Report, DD Form 1348-1. Report any discrepancies in accordance with
standard internal receiving procedures.
2-4 HOUSING.
If necessary to store the BDR for any period of time before installation, proceed as follows:
a. Clean the BDR before placing in storage, if necessary. Refer to paragraph 6-3.3.2.
b. Disconnect antennas and accessories before placing the BDR in storage.
c. Remove receiver-transmitters from the BDR assembly before placing in storage.
d. Remove batteries.
NOTE
The temperature of the storage area must be within the range -51°C (-60°F) to +68°C (155°F).
2-5 RECEIVING DATA.
Table 2-1 identifies the contents of the shipping container.
Table 2-1. BDR Packaging
Dimensions (in)
Box Description
W D L
Weight
(lb.)
1 BDR 34.625 68 33.75 195
2-6 MATERIAL HANDLING.
The weight of the equipment is such that a minimum of two persons are required to lift the (unpacked) equipment.