Instruction Manual 7064R-S-1844
Installation Instructions 2-2
NOTE
Logical address 0 is not allowed. Logical address 255
is not allowed because it is used for modules that
support dynamic configuration.
NOTE
The 7064R-S-1844 Register Based Breadboard
Module is shipped with the logical address set for 2.
Refer to the Resource Manager's manual for details
about addressing methods.
7064R-S-1844 to
VXIbus Main
Frame Installation
The 7064R-S-1844 Register Based module is ready for operation
when shipped. The address switch is set to 2.
To install the 7064R-S-1844 in a C-size VXI chassis, use the
following instructions:
1. Ensure power is OFF.
2. Configure the interrupt daisy chain on the backplane to bypass
empty slots, per VXIbus specifications.
3. Remove the front cover of the VXI chassis, and slide the 7064R-
S-1844 into the appropriate slot with the LED’s towards the top (or
to the left when using a horizontal chassis).
NOTE:
There is no need to configure the VXI Backplane Slot
used for the 7064R-S-1844 Register Based Module,
since all BUSGRANT and IACK signal lines are
passed to the next slot.
Power-up
Initialization
Before turning on the VXIbus mainframe, make sure a Slot 0 with a
Resource Manager is present. Upon power-up of the system, the
7064R-S-1844 goes through the following power-up sequence:
•
The 7064R-S-1844 Register Based module has four LED’s on
Содержание 7064R-S-1844
