Racal Instruments 7064R-S-1844, Инструкция по эксплуатации

Страница: 15 / 48

Instruction Manual 7064R-S-1844
Installation Instructions 2-3
the front panel – FAIL, ACCESS, MOD 0 ON, and MOD 1 ON.
The LED functions are:
FAIL
•
On during a (user provided) self-test
Off when the (user provided) self-test has
successfully completed
ACCESS
•
Blinks on when the VXIbus is accessing the
7064R-S-1844 Module
MOD 0 ON
•
On during test activity using Module 0
MOD 1 ON
•
On during test activity using Module 1
Configuration
Defaults
The Logical address is determined by the Logical Address
Switch S1. The default state of the Logical Address Switch
is "2". The user can set the address to any unused Logical
Address from 1-254.
The ID Register and the Device Type Register information
is set by jumpers JP1/JP2 and JP3/JP4. The default state
and the definitions of these registers are given in the
following figures.