![background image](http://html1.mh-extra.com/html/racal-instruments/1260-100x-x-series/1260-100x-x-series_user-manual_3136933032.webp)
1260-X138 User Manual
Module Operation 3-4
Racal Instruments
©
2005
In this mode, relay operations are processed in less than 9
microseconds, not counting relay settling time or software
overhead inherent in I/O libraries such as VISA. To determine the
relay settling time, refer to Relay Settling Time in the Specifications
section.
Consult the 1260-01T User’s Manual for a comparison of the
message-based and register-based modes of operation.
Operating In
Message-Based
Mode
Channel
Descriptors For
The 1260-X138
The standard 1260-01T commands are used to operate the 1260-
X138 module. These commands are described in the 1260-01T
User’s Manual. Appendix A shows the channel number
corresponding to each relay channel for operating in the message
based mode.
Each 1260-01T relay command uses a
channel descriptor
to select
the channel(s) of interest. The syntax for a channel descriptor is
the same for all 1260 series modules. In general, the following
syntax is used to select a single channel:
(@ <module address> ( <channel> ) )
Where:
•
<module address> is the address of the 1260-X138 module.
This is a number is in the range from 1 through 12, inclusive.
•
<channel> is the 1260-X138 channel to operate. They are
numbers from 0-7, 10-17, 20-27, etc. See Figure 2-1 and
Table 2-1.
Multiple individual channels may be specified using the following
channel descriptor syntax:
@ <module address> ( <chan1> , <chan2>
, . . ., <chanN> ))
A range of channels may be specified using the following channel
descriptor syntax:
@ <module address> ( <first channel> :
<last channel> ))
The following examples illustrate the use of the channel
Содержание 1260-100X X Series
Страница 8: ...1260 X138 User Manual iv This page was left intentionally blank...
Страница 10: ...1260 X138 User Manual Specifications 1 2 Racal Instruments 2005 Figure 1 1 The 1260 X138...
Страница 42: ...1260 X138 User Manual Module Operation 3 14 Racal Instruments 2005 This page was left intentionally blank...