![background image](http://html1.mh-extra.com/html/racal-instruments/1260-100x-x-series/1260-100x-x-series_user-manual_3136933029.webp)
1260-X138 User Manual
Racal Instruments
©
2005
Module Operation 3-1
Chapter 3
MODULE OPERATION
Setting the
Module Address
The Option-01T switch controller identifies each Adapt-a-Switch
plug-in or conventional 1260-Series module by a
module address
that is unique to that module. The module address is a number
from 1 through 12, inclusive.
The module address assigned to the 1260-X138 is determined by
the carrier slot into which the 1260-X138 is inserted, and by the
position of the logical address DIP switch on the carrier side panel.
The logical address switch has two settings:
•
1-6: When the switch is set to this position, the module
addresses of the plug-ins in a 1260-100X carrier are from 1
through 6. The module with address 1 is in the left slot of the
top row. The plug-ins are addressed in the following pattern:
Figure 3-1 Front View – Module Addresses for 1 through 6
1
2
3
4
5
6
Содержание 1260-100X X Series
Страница 8: ...1260 X138 User Manual iv This page was left intentionally blank...
Страница 10: ...1260 X138 User Manual Specifications 1 2 Racal Instruments 2005 Figure 1 1 The 1260 X138...
Страница 42: ...1260 X138 User Manual Module Operation 3 14 Racal Instruments 2005 This page was left intentionally blank...