Installing the Dash Cam
1. Push the mount into the slot on the top of the device, make sure the mount is
securely locked in place.
2. Remove the protective film from the suction cup, with the suction-cup laying
flat, position the suction-cap on the windshield, and then press down the
clamp to mount the holder to the windshield. Make sure the base is securely
locked in place.
3. Loosen the knob to swivel the device vertically. Lock the knob, to confirm that
the device is securely locked in place.
4. Rotate the device 360° to have proper view if required.
Connecting to Power
Use only the supplied in car charger for activating the device and charging the
built-in battery.
1. Connect one end of power connector to USB port on the device.
2. Plug the other end of the power adaptor to the cigarette lighter socket of your
vehicle. Once the vehicle engine is started, the device automatically turns on.
www.proofcam.com
04
