Motion Detection
First, enter General Settings to activate the Motion Detection function(the default
setting is Off, choose Low / Middle / High to activate the function); second,
setting the Power Off to be Never; third, press
down
button to enter
motion detection
mode on movie mode, the motion detection icon appears
on the right side of the screen and start count backwards 10 seconds, then
standby for detection, it will recording automatically once the device detects
any motion in front of the lens within 2.5m. The recording time depends on the
Motion event REC time and the default setting is 5 second.
The device will start next 5 second recording if any motion is detected, press any
button can exit from the motion detection mode and the icon will disappear from
the screen.
NOTES:
1. When the battery is fully charged and is in good condition, the device can
record continuously for about 15 minutes.
2. As the device is used, the battery storage capacity will decrease gradually.
G-sensor Collision Recording Protection (Protect Level)
When a collision is detected while recording, the default setting is for the lock
icon to appear on the right corner of the screen and the current movie segment
will be protected automatically and cannot be replaced.
Audio On / Off
During recording, press
UP
button to turn the microphone on and off.
09
RAC 205 Full HD Dash Cam
