- 34 -
M
AINTENANCE
F
ITIS
120 M
9901.00.20EN00 - 05/2015
Repair
1.
3.
2.
4.
Legend
1 Pivot
bolt
2
Shear bolt
-
Loosen the pivot bolt (
1
Swing the sub-soiler into the
retracted position.
-
Insert the new shear bolts (
2
IURPWKHVXEVRLOHUVLGH
-
Place the washer and tighten the fastening nut.
-
Block the shear bolt and the pivot bolt (observe the
WLJKWHQLQJWRUTXH
Tightening torque - shear bolt
Dimensions
Grade 4.6
Wrench size
(DIN ISO 272)
Nm
Ib-ft
M 16
71
53
24
Tightening torque - Pivot bolt
Dimensions
Grade 8.8
Wrench size
(DIN ISO 272)
Nm
Ib-ft
M 16
230
170
24
14 S
PARE
PARTS
In order to ensure the reliable operation and long service
life of your implement, only use original spare parts from the
manufacturer. The use of any parts, other than those provided by
the manufacturer automatically voids the warranty.
IMPORTANT:
This implement carries a CE conformity mark. Use
only new original replacement parts approved by the
manufacturer.
ʈ
Ensure that replacement parts are correctly installed and
positioned in the right direction. Check the implement each
time a part is installed and after each maintenance operation
to check correct operation.
14.1 Maintenance of plough bodies
IMPORTANT:
Protect the working surfaces of the mould boards
and the shares against corrosion by applying a light
coating of grease or oil.
ʈ
In particularly sticky soil conditions, apply a coat of liquid oil
with a sprayer or from an aerosol can on the mould boards as
VRRQDV\RXOHDYHWKH¿HOG
ʈ
When placing in storage, applying a thicker coat of oil to the
mould boards or spraying with dry graphite will slow down
corrosion.
